40mm MTB Road Bike No Tubes Tubeless Presta Aluminum Valves 1 Pair With Tape 18/20/22mm

1 Piece Grenade Valve Cap LED Light MTB Road Bike Bicycle LED Flash Light 6 Colors
  • Seller DRIFT MANIAC Official Store
  • List Price US $14.87piece
  • Sale Price US $9.67piece
  • Shipping Free Shipping
  • You Save US $5.20piece35% off
  • Ratings 4.9 (16)

Item Specifics

Brand NameDRIFT MANIAC

Product Description

Tubeless Presta aluminum valves with tubeless tape

By Drift Maniac

Features and specifications:

40 mm Tubeless Presta aluminum valves with tubeless tape 18 / 20 / 22 mm

Tubeless conversion kit
· Valve material: Aluminum alloy
· Valve total length: 40 mm
· Valve color: Anodized red / black
· Tape length: 30 m
· Tape width: 18 / 20 /22 mm
· Sale unit : 2 x valves / 2 x valves + 1 x roll tubeless tape

Showcase

Tubeless conversion kit

Valve features:
- 1 valve includes: 1 x valve stem and 1x valve core + 1 x O-ring + 1 x lock nut + 1 x valve cap
- Anodized aluminum alloy Presta valve (French valve), ultra light weight, anti-rust.
- Round valve end, wrapped with rubber, suitable with most tubeless ready rim or UST rim on the market.
- Delivered with lock nut to secure the valve on the rim and ensure optimum seal between rim and valve.
- Rubber O-ring is also delivered with the lock nut, place the O-ring under the lock nut. Protect your tubeless rim from scratches while tightening the lock nut.
- Valve core can be removed. Allow installation of valve extender or inject tubeless sealant.
Tape features:
- Different tape width is available, choose the tape width according to your rim inner width(the distance between rim side walls).
- 30 meters of tape length, enough to convert more than 5 rims.
- Golden transparent tape allow easy location of valve hole, facilitating cutting process of the valve hole on the tape.
- High strength tape but also very elastic, able to be taped around complex rim profile without leaving air bubbles.
- High strength tape, can withstand maximum air pressure from a road bike tires.

Installation

How to choose the tape width?
For hooked rim(A): rim inner width + 1 mm = tape width
For hookless rim(B): rim inner width = tape width

Tape application

1 Start applying the tape from 5-6 cm of the valve hole. (as "a" shows)
2 Tape around the rim 2 times.
3 Remove any visible air bubbles during taping process.
4 Check around the rim to see if there is any bubble left or wrinkles. If needed, re-tape the rim.
5 Find the valve hole with the help of a flash light.(as "b" shows)
6 Use a sharp knife cut off the tape that covers the valve hole.(as "c" shows)
7 File the tape around the valve hole, ensure a clean valve hole for the installation of the valve stem. (as "d" shows)

Valve assembly

Valve:
1 Check if the valve core is well tightened.
2 Remove the lock nut and O-ring.
3 Insert the valve stem through the valve hole on the rim. (as"a" shows)
4 Place the O-ring on the valve stem. (as"b" shows)
5 Thread the lock nut onto the valve stem.(as"c" shows)
6 Tighten the lock nut until the valve rubber end is pulled tightly in the rim valve hole. (as"d" shows)

Colors

SERVICES

Hot selling products from top sellers

All orders shipped from AliExpress warehouses within 24 hours

Dedicated customer service

PACKAGING AND SHIPPING GUARANTEE

Enjoy peace of mind with AliExpress door-to-door packaging and shipping protection